Grip Factory Munich GF-16 - Manual (Page 26)

GF-16 Crane System Instruction Manual
Page: 25
41. Connect the platform to the angle adjuster and secure with the removed safety pin
from the side of the angle adjuster. Ensure that the platform is level.
Tip:
The angle adjuster has an integrated leveller. By turning it, the vertical plate
on the angle adjuster can be set to a perfect right angle. Correct setting of
the angle adjuster enhances the crane’s balance.
42. Remove the support stand or rostrum supporting the counterweight bucket section.
43. Then unlock the friction.
Before operation, all locking pins, locking screws etc should be inspected to ensure
that all assembly sections are securely fastened.
Read “Balancing the crane arm” on page 44.