Greenheck Network Interface Controller (475262 IOM) (Pre May 2013) - Manual

1 Network Interface Controller for Tempered Air Products
Reference Guide for the Network Interface Controller
Please read and save these instructions. Read carefully before attempting to operate or maintain the product
described. Protect yourself and others by observing all safety practices. Failure to comply with instructions
could result in personal injury and/or property damage! Retain instructions for future reference.
Program Features
The network interface controller is a device that
acts as a communication link between the BMS
(Building Management System) and the unit. The
network interface controller will transform the
communication into an action within the unit and
will provide monitoring status of various functions
and temperatures. The controller has the ability to
communicate with a BMS through protocols such
as LonWorks®, BACnet® MSTP, BACnet® IP or
Modbus. See Points List at end of document for a
complete list of BMS points.
Introduction
BMS v1.00
Version Date: May 24, 2011
Introduction . . . . . . . . . . . . . . . . . . . . . 1
Input/Output Points . . . . . . . . . . . . . . . . . 2
Alarms . . . . . . . . . . . . . . . . . . . . . . . . 2
Remote Display Panel (Optional) . . . . . . . . . . 2
Display Use . . . . . . . . . . . . . . . . . . . . . 2
Keypad Description . . . . . . . . . . . . . . . . . 3
Example of Parameter Adjustment . . . . . . . . . 3
Example of Alarms . . . . . . . . . . . . . . . . . 3
List of Possible Alarms . . . . . . . . . . . . . . . 4
Main Menu Overview . . . . . . . . . . . . . . . . 4
Menu Overview . . . . . . . . . . . . . . . . . . . 5
Menus
A. Setpoint . . . . . . . . . . . . . . . . . . 6
B. Clock/Scheduler . . . . . . . . . . . . . . 6
C. Input/Output . . . . . . . . . . . . . . . . 6
D. Data Logger . . . . . . . . . . . . . . . . 6
E. Board Switch . . . . . . . . . . . . . . . 7
F. Service
a. Information . . . . . . . . . . . . . . . . 7
b. Overrides . . . . . . . . . . . . . . . . . 7
c. BMS Config . . . . . . . . . . . . . . . 8-9
d. Service Settings . . . . . . . . . . . . . 9
a. Working hour set. . . . . . . . . . . . 9
b. Probe adjustment . . . . . . . . . . . 9
c. Password/Defaults . . . . . . . . .9-10
G. Manufacturer
a. Configuration . . . . . . . . . . . . . . . 10
b. I/O Configuration . . . . . . . . . . . . . 11
c. Factory Settings . . . . . . . . . . . . . 11
d. Initialization . . . . . . . . . . . . . . . . 11
Points List
LonWorks® . . . . . . . . . . . . . . . . . . . . 12
ModBus/BACnet® . . . . . . . . . . . . . . . . 13
Typical Wiring Diagram . . . . . . . . . . . . . . . 14
Troubleshooting . . . . . . . . . . . . . . . . . . . 15
NTC Temperature Sensor Chart . . . . . . . . . . 15
BACnet® MSTP Quick Start . . . . . . . . . . . . 16
BACnet® IP/Eth Quick Start . . . . . . . . . . . . 17
Maintenance Log . . . . . . . . . . . . . . . . 18-19
Warranty . . . . . . . . . . . . . . . . . . . . . . .20
Table of Contents
®
®
Part #475262
Network Interface Controller for
Tempered Air Products