beautypg.com

Grandstream GXP1100 User Manual User Manual

Page 42

background image

FIRMWARE VERSION 1.0.8.4

GXP1100/GXP1105 USER MANUAL

Page 40 of 53

(Option 60)

PPPoE Account ID

Enter the PPPoE account ID.

PPPoE Password

Enter the PPPoE Password.

PPPoE Service Name

Enter the PPPoE Service Name.

IPv4 Address

Enter the IP address when static IP is used.

Subnet Mask

Enter the Subnet Mask when static IP is used for IPv4.

Gateway

Enter the Default Gateway when static IP is used for IPv4.

DNS Server 1

Enter the DNS Server 1 when static IP is used for IPv4.

DNS Server 2

Enter the DNS Server 2 when static IP is used for IPv4.

Preferred DNS Server

Enter the Preferred DNS Server for IPv4.

IPv6 Address Type

Allows users to configure the appropriate network settings on the phone to

obtain IPv6 address. Users could select "Auto-configured" or "Statically

configured" for the IPv6 address type.

Static IPv6 Address

Enter the static IPv6 address when Full Static is used in "Statically configured"

IPv6 address type.

IPv6 Prefix Length

Enter the IPv6 prefix length when Full Static is used in "Statically configured"

IPv6 address type.

IPv6 Prefix

Enter the IPv6 Prefix (64 bits) when Prefix Static is used in "Statically

configured" IPv6 address type.

DNS Server 1

Enter the DNS Server 1 for IPv6.

DNS Server 2

Enter the DNS Server 2 for IPv6.

Preferred DNS server

Enter the Preferred DNS Server for IPv6.

Network -> Advanced Settings

802.1X mode

Allows the user to enable/disable 802.1X mode on the phone. The default

value is disabled. To enable 802.1X mode, this field should be set to

EAP-MD5.

802.1X Identity

Enter the Identity for the 802.1X mode.

MD5 Password

Enter the MD5 Password for the 802.1X mode.

802.1X CA Certificate

Upload 802.1X CA certificate to the phone; or delete existed 802.1X CA

certificate from the phone.

802.1X Client Certificate

Upload 802.1X Client certificate to the phone; or delete existed 802.1X Client

certificate from the phone.

HTTP Proxy

Specifies the HTTP proxy URL for the phone to send packets to. The proxy

server will act as an intermediary to route the packets to the destination.

HTTPS Proxy

Specifies the HTTPS proxy URL for the phone to send packets to. The proxy

This manual is related to the following products: