Grandstream GXP1100 User Manual - Manual (Page 16)

FIRMWARE VERSION 1.0.8.4 GXP1100/GXP1105 USER MANUAL Page 14 of 53
5. The LED on the up right corner will light up in red during the booting up/provisioning/upgrading
process. Before continuing, please wait for the LED turn off;
6. Pick up the handset and the dial tone will be heard. Press *** to use the IVR menu and enter menu
options to hear the corresponding voice prompt. For example, dial 02 in the IVR menu will hear the IP
address. You can further configure the phone using the web GUI by entering GXP1100/GXP1105's IP
address.
Please see below the pin-out information for GXP1100/GXP1105.
Figure 2: GXP1100/GXP1105 Pin-out
SAFETY COMPLIA NCES
The GXP1100/GXP1105 phone complies with FCC/CE and various safety standards. The
GXP1100/GXP1105 power adapter is compliant with the UL standard. Use the universal power adapter
provided with the GXP1100/GXP1105 package only. The ma nufacturer’s warranty does not cover
damages to the phone caused by unsupported power adapters.
WARRANTY
If the GXP1100/GXP1105 phone was purchased from a reseller, please contact the company where the
phone was purchased for replacement, repair or refund. If the phone was purchased directly from
Grandstream, contact the Grandstream Support for a RMA (Return Materials Authorization) number before
the product is returned. Grandstream reserves the right to remedy warranty policy without prior notification.
Warning:
Use the power adapter provided with the phone. Do not use a different power adapter as this may damage
the phone. This type of damage is not covered under warranty.
GXP1100/GXP1105 Power Jack
GXP1100/GXP1105 Handset Jack GXP1100/GXP1105 Handset Plug