Grandstream GXP1100 User Manual - Manual (Page 30)

FIRMWARE VERSION 1.0.8.4 GXP1100/GXP1105 USER MANUAL Page 28 of 53
IP Setting DHCP, Static IP or PPPoE.
IPv4 Address The IPv4 address obtained on the phone.
IPv6 Address The IPv6 address obtained on the phone.
Subnet Mask The subnet mask obtained on the phone.
Gateway The gateway address obtained on the phone.
DNS Server 1 The DNS server address 1.
DNS Server 2 The DNS server address 2.
NTP Server The NTP server phone uses to sync up time.
PPPoE Link Up PPPoE connection status.
802.1q/802.1p(LLDP) The 802.1q/802.p status.
802.1q/VLAN Tag The assigned VLAN tag on phone.
802.1q Priority The assigned 802.1q priority on phone.
NAT Traversal NAT traversal status for each account.
Status -> System Info
Product Model Product model of the phone.
Part Number Product part number.
Software Version

Boot: boot version number;

Core: core version number;

Base: base version number;

Prog: program version number. This is the main firmware release number,
which is always used for identifying the software system of the phone;

Aux: Aux version number;

Dsp: DSP version number.
System Up Time System up time since the last reboot.
System Time Current system time on the phone system.
Service Status GUI and Phone service status.
Core Dump Core dump file that could be downloaded for troubleshooting purpose.
ACCOUNT PAGE DEFINITIONS
Account 1 -> General Settings
Account Active Activates/deactivates account. The default setting is "Yes".
Account Name The name associated with the SIP account.
SIP Server
The URL or IP address, and port of the SIP server. This is provided by your
VoIP service provider (ITSP).
Secondary SIP Server The URL or IP address, and port of the SIP server. This will be used when the