Grandstream GXP1610 Administration Guide - Manual (Page 43)

GXP1610/GXP1620/GXP1625/GXP1628
Administration Guide
Page 42 of 49
PUBLIC MODE
The GXP1610/GXP1620/GXP1625/GXP1628 supports hot desking using public mode. Under public
mode, users could login the phone with the SIP account User ID and password. Please follow the steps
below to configure the phone forpublic mode:

Fill up the SIP server address for account 1 first;

Under Web GUI->Settings->General Settings, set "Public Mode" option to "Yes". Click "Save" and
reboot the phone;

When the phone boots up, SIP User ID and Password to register to the configured SIP server in
account 1 will be required. Enter the correct account information to log in to the phone. When entering
the account information, press softkey "123/abc" to toggle input method;

In login page, pressing CONF button on the phone will show phone's IP address;

After using the phone, go to LCD MENU->LogOut to log off the public mode.
EDITING CONTACTS AND CLICK-TO-DIAL
From GXP1610/GXP1620/GXP1625/GXP1628 Web GUI, users could view contacts, edit contacts, or dial
out with Click-to-Dial feature on the top of the Web GUI. In the following figure, the Contact page
shows all the added contacts (manually or downloaded via XML phonebook). Here users could add new
contact, edit selected contact, or dial the contact/number.
Before using the Click-To-Dial feature, make sure the option "Click-To-Dial Feature" under web GUI-
>Settings->Call Features is turned on. By default it's disabled and the dialing icon in web GUI is in grey
.
When clicking on the icon on the top menu of the Web GUI, a new dialing window will show for you
to enter the number. Once Dial is clicked, the phone will go off hook and dial out the number from
selected account. Please see Figure 4 and Figure 5 in the following pages for more details.
Additionally, users could directly send the command for the phone to dial out by specifying the following
URL in PC's web browser, or in the field as required in other call modules.
http://ip_address/cgi-bin/api-make_call?phonenumber=1234&account=0&password=admin/123
In the above link, replace the fields with

ip_address: