Grandstream GXP1610 Administration Guide - Manual (Page 35)

GXP1610/GXP1620/GXP1625/GXP1628
Administration Guide
Page 34 of 49
in the Value field to be monitored.

Eventlist BLF
This option is similar to the BLF option but in this case the PBX collects
the information from the phones and sends it out in one single notify
message. PBX server has to support this feature.

Presence Watcher
This option has to be supported by a presence server and it is tied to the
"Do Not Disturb" status of the phone's extension.

Dial DTMF
Enter a series of DTMF digits in the Value field to be dialed during the
call. "Enable MPK Sending DTMF" has to be set to "Yes" first.

Voice Mail
Select Account and enter the Voice Mail access number in the Value field.

Call Return
The last answered calls can be dialed out by using Call Return. The Value
field should be left blank. Also, this option is not binding to the account
and the call will be returned based on the account with the last answered
call.

Transfer
Select Account, and enter the number in the Value field to be transferred
(blind transfer) during the call.

Call Park
Select Account, and enter the call park extension in the Value field to
park/pick up the call.

Intercom
Select Account, and enter the extension number in the Value field to do
the intercom.

LDAP Search
This option is to narrow the LDAP search scope. Enter the LDAP search
base in the Name field. It could be the same or different from the Base in
LDAP configuration under Advanced Settings. The Base in LDAP
configuration will be used if the Name field is left blank. Enter the LDAP
Name/Number filter in the Value field. LDAP search does not support
entering Non-ASCII characters

Multicast Paging
This option is for multicast sending. Enter Line key description in
Description field and multicast sending address in Value field.
Settings -> Broadsoft Directories
XSI
Configures XSI Directory.

Server
Defines Broadsoft XSI server address with protocol.

Port.
Defines the port of XSI Server.

User name.
Username for Broadsoft XSI server.

Password.
Password for Broadsoft XSI server.
Network Directories
Enable/Disable Broadsoft Network directories and defines the directory name.
The directory types are:

Group Directory

Enterprise Directory

Group Common

Enterprise Common