Weather update, Figure 2: web service, Section f – Grandstream GXP1610 Administration Guide User Manual
Page 42
GXP1610/GXP1620/GXP1625/GXP1628
Administration Guide
Page 41 of 49
when multiple GXPs are behind the same NAT. If using a Public IP address, set this parameter to
"No".
NAT Traversal
It is under Accounts X->Network Settings. Default setting is "No". Enable the device to use NAT
traversal when it is behind firewall on a private network. Select Keep-Alive, Auto, STUN (with STUN
server path configured too) or other option according to the network setting.
WEATHER UPDATE
To customize GXP1610/GXP1620/GXP1625/GXP1628 to display weather information for the preferred
city, users could go to Web GUI->Settings->Web Service page and enter the city code in the following
options:
Figure 2: Web Service
By default the City Code is set to "Auto", which allows the phone to obtain weather information based on
the IP location detected. To use "Self-Defined City Code" option, please follow the steps below to obtain
the correct city code:
In a web browser, go to
www.weather.com
;
Enter the city name in the search field. For example, Boston, MA. And click on "SEARCH";
The searching result will show in a new window with URL in the browser's address bar. For example,
In the above link, USMA0046 is the city code to be filled in "Self-Defined City Code" option.
Users could then further configure the "Update Interval" and "Degree Unit" for weather information
display.