Grandstream GXP1610 Administration Guide - Manual (Page 17)

GXP1610/GXP1620/GXP1625/GXP1628
Administration Guide
Page 16 of 49
CONFIGURATION GUIDE
The GXP1610/GXP1620/GXP1625/GXP1628 can be configured via two ways:
 LCD Configuration Menu using the phone's keypad;
 Web GUI embedded on the phone using PC's web browser.
CONFIGURATION VIA KEYPAD
To configure the LCD menu using phone's keypad, follow the instructions below:
 Enter MENU options. When the phone is in idle, press the round MENU button to enter the
configuration menu;
 Navigate in the menu options. Press the UP/DOWN/LEFT/RIGHT arrow keys to navigate in the
menu options;
 Enter/Confirm selection. Press the round MENU button to enter the selected option;

Exit. Press LEFT arrow key to exit to the previous menu;

The phone automatically exits MENU mode with an incoming call, when the phone is off hook or
the MENU mode if left idle for more than 60 seconds.

When the phone is in idle, pressing the navigation keys UP/DOWN/RIGHT can access the call
history entries:
UP - Missed Calls
DOWN - Dialed Calls
RIGHT - Answered Calls
The MENU options are listed in the following table.
Table 4: GXP1610/GXP1620/GXP1625/GXP1628 Menu Options
Call History
Displays answeredcalls, dialed calls, missed calls, transferred calls and
forwarded calls.
Status
Displays account status, network status, software version number and
Hardware
 Network status.
Press to enter the sub menu for IP setting information (DHCP/Static
IP/PPPoE), IPv4 address, IPv6 address, Subnet Mask, Gateway，
DNS server and NTP server.
 Account status.
 Software and Hardware Version
Press to enter the sub menu for Boot, Core, Base, Prog and Locale