Grandstream GXP1610 Administration Guide - Manual (Page 28)

GXP1610/GXP1620/GXP1625/GXP1628
Administration Guide
Page 27 of 49
e) [147] - any digit of 1, 4, or 7
f) <2=011> - replace digit 2 with 011 when dialing
g) | - the OR operand
 Example 1: {[369]11 | 1617xxxxxxx}
Allow 311, 611, and 911 or any 11 digit numbers with leading digits 1617;
 Example 2: {^1900x+ | <=1617>xxxxxxx}
Block any number of leading digits 1900 or add prefix 1617 for any dialed 7
digitnumbers;
 Example 3: {1xxx[2-9]xxxxxx | <2=011>x+}
Allows any number with leading digit 1 followed by a 3 digit number, followed
by any number between 2 and 9, followed by any 7 digit number OR Allows
any length of numbers with leading digit 2, replacing the 2 with 011 when
dialed.
Example of a simple dial plan used in a Home/Office in the US:
{ ^1900x. | <=1617>[2-9]xxxxxx | 1[2-9]xx[2-9]xxxxxx | 011[2-9]x. | [3469]11 }
Explanation of example rule (reading from left to right):
 ^1900x. - prevents dialing any number started with 1900;
 <=1617>[2-9]xxxxxx - allows dialing to local area code (617) numbers by
dialing7 numbers and 1617 area code will be added automatically;
 1[2-9]xx[2-9]xxxxxx |- allows dialing to any US/Canada Number with 11
digits length;
 011[2-9]x - allows international calls starting with 011;
 [3469]11 - allows dialing special and emergency numbers 311, 411, 611
and 911.
Note:
In some cases where the user wishes to dial strings such as *123 to activate
voice mail or other applications provided by their service provider, the * should
be predefined inside the dial plan feature. An example dial plan will be: { *x+ }
which allows the user to dial * followed by any length of numbers.
Delayed Call Forward
Wait Time Defines the timeout (in seconds) before the call is forwarded on no answer.
Valid range is 1 to 120.
Enable Call Features
The default setting is "Yes". When enabled, call features using star codes will
besupported locally. If set to "No", Call Features and DND options under LCD
menu are supported. And ForwardAll softkey will not be displayed in LCD for
Account 1.
Call Log
Configures Call Log setting on the phone. You can log all calls, only log
incoming/outgoing calls or disable call log. The default setting is "Log All
Calls".
Account Ring Tone Configures ring tone for the account.
Match Incoming Caller
ID
Specifies matching rules with number, pattern or Alert Info text. When the
incoming caller ID or Alert Info matches the rule, the phone will ring with
selected distinctive ringtone. Matching rules:

Specific caller ID number. For example, 8321123;

A defined pattern with certain length using x and + to specify, where x
could be any digit from 0 to 9. Samples:
xx+ : at least 2-digit number;
xx : only 2-digit number;