Grandstream GXP1610 Administration Guide - Manual (Page 21)

GXP1610/GXP1620/GXP1625/GXP1628
Administration Guide
Page 20 of 49
CONFIGURATION VIA WEB BROWSER
The GXP1610/GXP1620/GXP1625/GXP1628 embedded Web server responds to HTTP/HTTPS
GET/POST requests. Embedded HTML pages allow a user to configure the IP phone through a Web
browser such as Microsoft’s IE, Mozilla Firefox and Google Chrome.
To access the GXP1610/GXP1620/GXP1625/GXP1628 Web GUI:
1. Connect the computer to the same network as the phone;
2. Make sure the phone is turned on and shows its IP address. You may check the IP address on LCD;
3. Open a Web browser on your computer;
4. Enter the phone’s IP address in the address bar of the browser;
5. Enter the administrator’s login and password to access the Web Configuration Menu.
Note:
 The computer has to be connected to the same sub-network as the phone. This can be easily done
by connecting the computer to the same hub or switch as the phone connected to. In absence of a
hub/switch (or free ports on the hub/switch), please connect the computer directly to the PC port on
the back of the phone.
 If the phone is properly connected to a working Internet connection, the IP address of the phone will
display in MENU->Status->Network Status. This address has the format: xxx.xxx.xxx.xxx, where xxx
stands for a number from 0-255. Users will need this number to access the Web GUI. For example, if
the phone has IP address 192.168.40.154, please enter "http://192.168.40.154"in the address bar of
the browser.
 There are two default passwords for the login page:
User Level User Password Web Pages Allowed
End User Level user 123 Only Status page, Basic Settings in
Advanced Settings page and some
settings in maintenance page.
Administrator Level admin admin Browse all pages
The password is case sensitive with maximum length of 25 characters.
 When changing any settings, always SUBMIT them by pressing the SAVE button on the bottom of the
page. After submitting the changes in all the Web GUI pages, reboot the phone to have the changes
take effect if necessary. All the options under Basic Setting and Account Setting, and most of the
options under Advanced Settings do not require reboot after submitting the changes. Under Advanced
Setting, the parameters on network configuration require reboot after update.