Gasboy PLUS FMS - Manual (Page 50)

SiteOmat Software Set Up Unblocking or Activating Pumps
Page 4-24 MDE-5067 FedEx Islander PLUS FMS Installation Manual · March 2013
Unblocking or Activating Pumps
To unblock or activate pumps, proceed as follows:
After the SiteOmat is configured, unblock or activate the pumps/oil reels that are on the site.
All the pumps not being used will remain blocked.
1 Determine the pumps/reels that need to be activated and identify how they are numbered.
• For example, the island has two master pumps with satellites and one oil reel.
• Master and satellites are numbered 1 and 2.
• Oil reel is numbered 4.
2 In this example, Pumps 1, 2, and 4 are active. Pump 3 is blocked.
• For example, Status screen [see Figure 4-42 (i) ]
• For example, Setup screen [see Figure 4-42 (ii) ]
Figure 4-42: Setup and Status Screen of Pump
Pumps Status Screen
Pumps Setup Screen
(i)
(ii)
3 On the Pump Status screen, right-click the pump that you want to unblock and select the
Unblock pump option from the list.
Note: Right-clicking at the black rectangle of the pump works best.
Figure 4-43: Unblocking Pump