GAI-Tronics 12514-007, 12514-008, 12514-009 6', 15', 25' Coil Cord, 6C and Bushing Kit - Manual (Page 6)

Pub. 42003-035B
M ODELS 12514-007, 12514-008, AND 12514-009 PVC C OIL C ORD R EPLACEMENT K IT Page: 6 of 6
\\s_eng\gtcproddocs\standard ioms - current release\42003 kit manuals\42003-035b.doc
Models 616C, 6165, 716-002, and 7165-002
Removal of old cord
1. Remove the unit from the wall or mounting surface.
2. Remove the four back panel screws.
3. Follow Steps 3 through 7 under “Removal of old cord” in the section for 611C, 6115, 711-002, and
7115-002 above.
Installation of new cord
1. Follow Steps 1 through 7 under “Installation of new cord” in the section for 611C, 6115, 711-002,
and 7115-002 above.
2. Replace the four back panel screws.
3. Remount the unit.
Models 726 and 7265-101
Removal of old cord
1. Loosen the four screws securing the housing to the base.
2. Hinge the housing forward to access the inside of the subset.
3. Follow Steps 3 through 7 under “Removal of old cord” in the section for 611C, 6115, 711-002, and
7115-002 above.
Installation of new cord
1. Follow Steps 1 through 7 under “Installation of new cord” in the section for 611C, 6115, 711-002,
and 7115-002 above.
2. Place the housing on the base and tighten the four screws.