GAI-Tronics CB193-001 Call Boxes - Manual (Page 38)

Pub.: 43004-031E
Model CB193-xxx, CB194-xxx, and CB195-xxx RF Call Boxes Page 37 of 52
f:\radio products-current release\43004\43004-031e\43004-031e.doc
11/12
Call Box Instruction Labeling
Call box-to-Telephone Line Operation: When using the RF Call Box in call box-to-telephone line
mode of operation, the front panel instruction label must be changed.
Replace the factory-installed instruction label with the label found in the hardware envelope packaged
inside the Call Box. Label replacements should be as follows:
Models CB193-xxx and CB195-xxx
Old Label (Factory-installed) New Label (In envelope)
N OTE : The instruction information etched into the Model CB195-xxx front panel will be covered by
the new label shown above.
Model CB194-xxx
Old Label (Factory-installed) New Label (In envelope)