GAI-Tronics CB193-001 Call Boxes - Manual (Page 15)

Pub.: 43004-031E
Model CB193-xxx, CB194-xxx, and CB195-xxx RF Call Boxes Page 14 of 52
f:\radio products-current release\43004\43004-031e\43004-031e.doc
11/12
Introduction
The GAI-Tronics RF Call Boxes are designed for isolated areas requiring voice communication
equipment, using wireless RF technology to provide half-duplex communication. These units are ideal
for areas where underground or overhead cabling is undesirable or not available. The simple push-to-
talk, release-to-listen operation provides user-friendly functionality, and these designs are extremely
resistant to vandalism.
RED GREEN
TALK
FLASHING RED - WAIT
LISTEN
STATUS LAMP
Figure 1. Model CB193-xxx, CB194-xxx, and CB195-xxx Outline Drawing
The Model CB193-xxx Push-Button RF Call Box (yellow) and CB194-xxx Handset RF Call Box (gray)
enclosures are constructed of durable Valox
® material, and have a weatherproof rating of NEMA 3R
when installed according to directions. The CB193-xxx and CB194-xxx RF Call Boxes can be wall-
mounted or mounted to a pole measuring 1 to 4 inches in diameter using the Model 230-001 or the Model
231-001 Pole Mounting Kit.
The Model CB195-xxx Flush-Mount RF Call Box is equipped with these same features, but is housed in
a brushed stainless steel flush-panel enclosure rated NEMA 3R that is designed for flush mounting. This
can be done within any wall cavity or by using the GAI-Tronics Model 234 Series stanchions.