GAI-Tronics 10961-001 AMI Centra-Page Interface - Manual (Page 13)

Pub. 42004-371B
Model 10961-001 AMI Centra-Page Interface Page: 13 of 22
\\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-371b.doc
09/05
Startup
The AMI begins its startup procedure when 24 V dc is applied. When the startup procedure is complete,
the AMI will be communicating with the 69407-002 I/O controller PCBA on the Model 10961-001
Interface.
“System Up” will be displayed on the AMI. When viewed from the rear of the cabinet, LED1 on the
69407-002 should be flashing. Use the display and the buttons on the front of the AMI to set the time and
date. Refer to GAI-Tronics Pub. 42004-345 for more setup and operation information for the AMI.
Quick Test
1. Press the P RIORITY 1 button on the front of the Interface panel to play the Alarm 1 tone over the
Centra-Page station and the crew’s quarters speakers.
2. Press the CLEAR button on the front panel of the AMI Centra-Page Interface to stop the alarm tone.
3. Set the D AY /N IGHT switch on the front of the AMI Centra-Page Interface panel to Night Mode. Call
the AMI from an external line or a phone with a different number than the AMI.
4. When ringing can be heard through the Centra-Page system, press the ACCESS button on the front
of the Interface panel to answer the phone.
5. From a Centra-Page station set to party line 1, take the handset off-hook. There should be two-way
audio with the calling phone.
6. Press the D ISCONNECT button on the front of the AMI Centra-Page Interface panel to hang up the
phone.