Foxconn P35AP-S - Manual (Page 41)

Chapter 3 BIOS Description
35
Write to Precharge (tWR)
This item allows you to set Write to Precharge delay (in clock cycles).
Row Refresh Cycle (tRFC)
This item allows you to set Row Refresh Cycle (in clock cycles).
Write to Read Delay (tWTR)
This item allows you to set minimum W rite-to-read delay (in clock cycles).
Row to Row Delay (tRRD)
This item allows you to set Row to Row Delay (in clock cycles).
Read to Precharge (tRPT)
This item is uased to set the read CAS to precharge time (in clock cycles).
Fast Chip Select
This item used to enabled or disabled the fast chip select.
Clock Per Command
This item is uased to set the Clock Per Command (in clock cycles).
All Voltage Control Menu
8.3 All Voltage Control
Target/Current/Default CPU Voltage
These items show the Target/Current/Default CPU Voltage detected auto-
matically by system.
NOTE: The Target CPU Voltage equal to “CPU Voltage Multiplier” multiply
“CPU Voltage Setting” .
CPU Voltage Setting
This item is used to set CPU Voltage.
DRAM Voltage Setting
This item is used to set DRAM Voltage. The default voltage is 1.800V.
Pay attation to the Warning message in the “Item Help” table.
PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn