Foxconn P35AP-S User Manual

Page 35

Chapter 3 BIOS Description

5.2 Power Express PM Function

Power Express PM Function

Wake- Up by PCI card

This item is used to set the system to wake up by PCI card.

Power On by Ring
If this item is enabled, it allows the system to resume from a software
power down or power saving mode whenever there is an incoming call to
an installed fax. This function needs to be supported by the relevant
hardware and software.

USB KB Wake-Up From S3

This item is used to set the system to wake up by USB equipment when it is
in S3(Suspend to RAM)mode.

Power On By Mouse

When enabled, it allows you to use the PS/2 mouse to wake up the system
from soft off and green mode. This feature requires an ATX power supply.

Power On By Keyboard

This item allows you to use the PS/2 keyboard to wake up the system from soft
off and green mode. This feature requires an ATX power supply. The setting
values: [Disabled]; [Ctrl+ESC]; [Ctrl+F1]; [Ctrl+Space]; [Any Key].

5.3

ACPI Function

ACPI stands for “Advanced Configuration and Power Interface”. ACPI is a
standard that defines power and configuration management interfaces be-
tween an operating system and the BIOS. In other words, it is a standard that
describes how computer components work together to manage system
hardware. In order to use this function the ACPI specification must be sup-
ported by the OS (for example, Windows2000 or WindowsXP). The available
setting values: [Enabled]; [Disabled].

PDF 文件使用 "pdfFactory" 试用版本创建