Foxconn P35AP-S User Manual
Page 37
Chapter 3 BIOS Description
31
6. PnP/PCI Configurations
PnP/PCI Configurations Menu
6.1
Init Display First
This item is used to set which display device will be used first when your PC
starts up.Setting values:[PCI Slot]; [PCIEx].
6.2
Resources Controlled By
This item is used to define the system resource control scheme. If all cards
you use support PnP, then select [Auto] and the BIOS will automatically dis-
tribute interruption resources. If the ISA cards you installed not supporting
PnP, you will need to select [Manual] and manually adjust interruption
resources in the event of hardware conflicts. However, since this motherboard
has no ISA slot ,this option does not apply.
6.3
IRQ Resources
Press the
6.4
PCI/VGA Palette Snoop
If you use a non-standard VGA card, use this option to solve graphic accelera-
tion card or MPEG audio card problems (e.g., colors not accurately displayed).
6.5
INT Pin 1/2/3/4/5/6/7/8 Assignment
Use this item to assignment IRQ resources for INT Pin 1/2/3/4/5/6/7/8.
6.6
PCI Express relative items
Maximum Payload Size
This item is used to set maximum TLP payload size for PCI Express devices.
The unit is byte.
PDF 文件使用 "pdfFactory" 试用版本创建