Foxconn P35AP-S - Manual (Page 15)

Chapter 2 Installation Instructions
9
5. Close the load plate, and slightly push down the tongue side.
6. Lower the lever and lock it to the load plate, then the CPU is locked completely.
Note :
Excessive temperatures will severely damage the CPU and system.
Therefore you should install the CPU cooling fan and make sure that
it works normally at all times in order to prevent overheating and
damage to the CPU. Please refer to your CPU fan user guide for
correct installation.
This motherboard includes four 240-pin slots with 1.8V for DDR2 and two 240-
pin slots with 1.5V For DDR3 . You must install at least one memory bank to
ensure normal operation.
Memory
PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn