Foxconn 925XE7AA-8EKRS2-RAID - Manual (Page 8)

RAID User’s Guide
6
B. Setting RAID1
a. Select RAID1 (Mirror) by using Up and Down arrow keys in RAID Level item.
Press the key to make selecting.
c. Choose which two hard disks you want to set RAID 1 from Disks item, if you
install three or more SATA hard disks. Otherwise continue with the next step.
Using up or down arrow key to select the hard disk, key to confirm and
key to finish the selection.
b. The following information will appear on screen:
Press “Enter” to create the specified volume.
Press the key again to confirm.
ＲＡＩＤ Ｍａｎｕａｌ．ｐ６５ 2005-1-21, 10:29 6