Raid user’s guide, 40 7. rebuilding a raid array – Foxconn 925XE7AA-8EKRS2-RAID User Manual

Page 42

Text mode
Original mode

RAID User’s Guide

7. Rebuilding a RAID array

This option allows you to reconstruct an existing RAID array. This option applies
only to RAID1 (Mirrored) or RAID 0+1 (Striped+Mirrored) sets.
To rebuild a RAID array:
a. From the IT8212F Setup Utility screen, press <4>. The following screen appears.

c. Use the up or down arrow keys to select a drive, then press . Follow
succeeding screen instructions.
d. Press to exit.

b. Use the up or down arrow keys to select a RAID array, then press to
rebuild. The following screen appears.

ＲＡＩＤ　Ｍａｎｕａｌ．ｐ６５

2005-1-21, 10:29

This manual is related to the following products:

945P7AC-8KRS2