Foxconn 925XE7AA-8EKRS2-RAID - Manual (Page 39)

RAID User’s Guide
37
4. Auto-configuring a RAID array
This option allows you to select a supported RAID set for the utility to automatically
configure.
To auto-configure a RAID set:
a. From the IT8212F Setup Utility screen, press <1>. The following screen appears.
2 2
b. Use the left or right arrow keys or the space bar to select a RAID set. As you
select an option, the screen displays the array configuration of the RAID based
on the number of IDE devices installed.
c. Press to save your RAID set.
d. Press to exit.
Note: There are five configurations supported:
RAID Type
RAID 0
RAID 1
RAID 0+1
JBOD
IDE Configurations
Disk Striping
Disk Mirroring
Disk Striping+Mirroring
Disk Concatenation
None Number of disks needed
2/ 3/ 4
2
4
2/ 3/ 4
1/ 2/ 3/ 4
ＲＡＩＤ Ｍａｎｕａｌ．ｐ６５ 2005-1-21, 10:29 37