Foxconn 925XE7AA-8EKRS2-RAID - Manual (Page 6)

RAID User’s Guide
4
b. Choose Create RAID Volume and press to enter. Press to
switch to RAID Level item, and then use Up and Down arrow keys to select RAID0
(Stripe), pressing confirms.
c. Choose which two hard disks you want to set RAID 0 from Disks item, if you
install three or more SATA hard disks. Otherwise continue with the next step.
Using up or down arrow key to select the hard disk, key to confirm and
key to finish the selection.
ＲＡＩＤ Ｍａｎｕａｌ．ｐ６５ 2005-1-21, 10:29 4