Foxconn 925XE7AA-8EKRS2-RAID - Manual (Page 23)

RAID User’s Guide
21
Deleting RAID Groups, Spare Drive, and JBOD
1. To remove one or more RAID sets, spare drives, and JBODs, select “Delete
RAID set”.
2. Select the desired item to delete from the logical drive list and press Enter.
3. Press “Y” when asked, “Are You Sure (Y/N)?”
4. The drives will be returned to the selection of logical drives from which a new
RAID set can be created.
Rebuild RAID 1 Set
This menu selection is used to initiate the copying of data from an existing drive to
a replacement drive that has been installed in a RAID 1 set after the failure of one
of the members.
1. Select “Rebuild RAID1 set.
2. Select the desired set and press Enter.
3. Press “Y” when asked, “Are You Sure?”
4. The set will be rebuilt. The status of the rebuild is displayed in the MAIN MENU
window.
ＲＡＩＤ Ｍａｎｕａｌ．ｐ６５ 2005-1-21, 10:29 21