Foxconn 925XE7AA-8EKRS2-RAID - Manual (Page 11)

RAID User’s Guide
9
e. Select RAID1 (Mirror) by using Up and Down arrow keys in RAID Level item
after finished setting RAID0. Press the key to make selecting.
f. The following steps is the same as Setting RAID 1.
g. You may see the information in the main menu, when you finished the setting
steps.
Note:
This operation will delete all the data from hard disk, so please take
care. And our company will not be responsible for data lose and benefit
damage caused.
ＲＡＩＤ Ｍａｎｕａｌ．ｐ６５ 2005-1-21, 10:29 9