Foxconn 925XE7AA-8EKRS2-RAID - Manual (Page 5)

RAID User’s Guide
3
2. Installing SATA Hard Disks
STEP 1: Install two SATA hard disks into the drive bays at least. (SATA_1, SATA_2,
SATA_3, SATA_4)
STEP 2: Connect one end of the SATA data cable to the motherboard’s one of
SATA connectors.
STEP 3: Connect the other end of the SATA data cable to one SATA hard disk.
STEP 4: Connect one end of the second SATA data cable to the motherboard’s
the other of SATA connectors.
STEP 5: Connect the other end of SATA data cable to the other SATA hard disk.
3. BIOS Configuration
1. Enter the BIOS setup program by pressing the key during the POST
(Power-On Self Test ).
2. Select the OnChip IDE Device item form Integrated Peripherals menu.
3. Switch the SATA Mode option to [RAID].
4. Save the BIOS setting and exit the BIOS setup program.
4. RAID Configuration Utility
A. Setting RAID 0
a. When the system powers on, the following information will appear on screen:
Press the to enter Configuration Utility.
At this moment, press + to enter Main Menu:
ＲＡＩＤ Ｍａｎｕａｌ．ｐ６５ 2005-1-21, 10:29 3