Foxconn 925XE7AA-8EKRS2-RAID - Manual (Page 10)

RAID User’s Guide
8
C. Setting RAID 0+1
a. To utilize RAID 0+1 function, four SATA hard disks should be installed.
b. Choose Create RAID Volume and press to enter. Press to
switch to RAID Level item, and then use Up and Down arrow keys to select RAID0
(Stripe), pressing confirms.
c. Using up and down arrow keys to select two hard disks for RAID 0,
key to confirm and key to finish the selection in the Disks item.
d. The following steps is the same as Setting RAID 0.
ＲＡＩＤ Ｍａｎｕａｌ．ｐ６５ 2005-1-21, 10:29 8