Foxconn Quantumian1 User Manual

Page 87

Create Recovery

1. Select “1.Create RAID Volume” from the main menu and press .

2. In "Name" item, you can input a device name for the Recovery system and press

to apply it. Here, we name it as TryRecovery to replace the default Volume0.

3. In “

RAID Level” item, you can use Up or Down arrow key to make a selection.

Select Recovery and press .

Enter a unique volume name that has no special characters and is

16 characters or less.

Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.0.0.1184

[

CREATE VOLUME MENU

]

[

HELP

]

Name:

RAID Level:

Disks:

Strip Size:

Capacity:

Sync:

Volume0
RAID0(Stripe)
Select Disks
128KB
0.0 GB

N/A

Create Volume

TryRecovery

[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select

Recovery: Copies data between a master and a recovery disk.