Acpi configuration – Foxconn Quantumian1 User Manual

Page 36

ACPI Configuration

ACPI

[V4.0]

ACPI Sleep State

[S3 (Suspend to RAM)]

Lock Legacy Resources

[Disabled]

S3 Video Repost

[Disabled]

WHEA Support

[Enabled]

High Precision Event Timer

[Enabled]

Restore on AC Power Loss

[Power Off]

Realtek LAN / USB3.0 standby power [Enabled]
USB standby power

[Enabled]

PCH standby power

[Enabled]

PS/2 standby power

[Enabled]

Wake on PS/2 KB from S1 and S3

[Enabled]

Wake on Intel GbE LAN from S5

[Enabled]

Wake on USB Device

[Enabled]

Wake on PCI device

[Enabled]

Wake on PCIe device

[Enabled]

Resume By RTC

[Disabled]

→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values

F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Select the ACPI version tables.

Advanced

► ACPI

This item is used to select the ACPI version.

► ACPI Sleep State

This item is used to set the energy saving mode of the ACPI function. When you select “S1

(POS)” mode, the power is always on and computer can be resumed at any time. When

you select “S3 (STR)” mode, the power will be down after a period of time. The status of the

computer before it entering STR will be saved in memory, and the computer can quickly return

to previous state when the STR function wakes.When you select “Auto”, it means OS will

automatically take care and assign which mode is the most suitable now.

► Lock Legacy Resources
This item is used to enable or disable lock of legacy resources.
► S3 Video Repost

This item determines whether to invoke VGA BIOS post on S3/STR resume.

► WHEA Support

This item is used to enable or disable Windows Hardware Error Architecture(WHEA).

► High Precision Event Timer

This item is used to enable or disable the high precision event timer.

► Restore on AC Power Loss

This item is used to set which state the PC will take with when it resumes after an AC power

loss.

► Realtek LAN / USB3.0 standby power

This item is used to enable or disable the Realtek LAN/USB3.0 standby power. Disabling this

function will reducing system power consumption when computer go into standby mode or

power off state.

► USB standby power

This item is used to enable or disable the USB standby power. Disabling this function will

reducing system power consumption when computer go into standby mode or power off state.

► PCH standby power