Foxconn Quantumian1 - Manual (Page 82)

5
75
Create RAID 10 (0+1)
1. Select “1.Create RAID Volume” from the main menu and press .
2. In "Name" item, you can input a device name for the RAID10 system and press
to apply it. Here, we name it as TryRAID10 to replace the default Volume0.
3. In “
RAID Level” item, you can use Up or Down arrow key to make a selection.
Select RAID10(RAID0+1) and press .
Enter a unique volume name that has no special characters and is
16 characters or less.
Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.0.0.1184
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU ]
[ HELP ]
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
Volume0
RAID0(Stripe)
Select Disks
128KB
0.0 GB
N/A
Create Volume
TryRAID10
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
RAID 10: Mirrors data and stripes the mirror.
Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.0.0.1184
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
[ HELP ]
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
TryRAID10
RAID0(Stripe)
Select Disks
64KB
149.1 GB
N/A
Create Volume
RAID10(RAID0+1)
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
[ CREATE VOLUME MENU ]