Foxconn Quantumian1 - Manual (Page 70)

5
63
5-2 BIOS Configuration
1. Enter the BIOS setup by pressing key during the POST(Power On Self Test).
2. Use the arrow right/left keys to select the “Advanced” menu, then use the arrow
up/down keys to select the “SATA Configuration” item and press to go to the
configuration items.
3. Press to select and set the “SATA Mode” option to [RAID Mode].
4. Press to save the setting then PC will reboot itself.
5-3 Create RAID in bIoS
enter RAID bIoS Setup
When BIOS is restarted, it will display a message asking you to press + keys
simultaneously to enter the main menu of Intel
® Rapid Storage Technology enterprise
Option ROM Utility. Press the + to enter Configuration Utility.
1. Create RAID Volume 3. Reset Disks to Non-RAID 1. Create RAID Volume 3. Reset Disks to Non-RAID
2. Delete RAID Volume 4. Recover Volume Options
5. Exit
RAID Volume :
None Defined.
Physical Disks:
Port Drive Model
Serial # Size Type/Status(Vol ID)
0 Hitachi HDS72161 PVF904�21G2J�M 149.0GB Hitachi HDS72161 PVF904�21G2J�M 149.0GB PVF904�21G2J�M 149.0GB
Non-RAID Disk
1 ST380811AS
5PS1TAGW 74.5GB
Non-RAID Disk
2 SAMSUNG HD161HJ
S0V3J9APA30524 149.0GB 149.0GB
Non-RAID Disk
3
ST380815AS 5RW1CA37 74.5GB
Non-RAID Disk
Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.0.0.1184
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
[ DISK/VOLUME INFORMATION ]
[ MAIN MENU ]
1. Create RAID Volume
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
SATA Configuration SATA Configuration
SATA Mode [RAID Mode]
SATA Port 0
Not Present
Port Hot Plug [Disabled]
SATA Port 1
Not Present
Port Hot Plug [Disabled]
SATA Port 2
Not Present
Port Hot Plug [Disabled]
SATA Port 3
Not Present
Port Hot Plug [Disabled]
SATA Port 4
Not Present
Port Hot Plug [Disabled]
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
(1) IDE Mode.
(2) AHCI Mode.
(3) RAID Mode.
Enabled onboard SATA RAID
option ROM if Launch Storage
OpROM is enabled.
Advanced