Foxconn Quantumian1 - Manual (Page 40)

3
33
[Auto] : This is default option. For a root port, the default time is 100ms. For a hub port, the
delay is taken from hub descriptor.
[Manual]: you can change the time you want by the following item.
Hardware Monitor
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Hardware Monitor
CPU FAN Mode [Smart Fan]
System FAN1 Mode [Smart Fan]
System FAN2 Mode [Smart Fan]
System FAN3 Mode [Smart Fan]
CPU FAN Speed 2536 RPM
System FAN1 Speed 0 RPM
System FAN2 Speed 0 RPM
System FAN3 Speed 0 RPM
SandyBridge-E CPU Temperature + 55 C
Waimea Bay System Temperature + 30 C
Patsburg PCH Temperature + 36 C
CPU VSA Voltage +1.27 V
CPU Core Voltage +1.12 V
CPU VTT(Uncore) Voltage +1.09 V
DDR3 Memory Voltage (VDIMM1&2) +1.53 V
DDR3 Memory Voltage (VDIMM3&4) +1.54 V
Battery 3V Voltage +3.42 V
PSU Stand By 3.3V Rail +3.35 V
PSU 3.3V Rail +3.29 V
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Set the CPU FAN Mode function.
Option:
(1) Full Speed
(2) By Duty Cycle
(3) Smart Fan
(4) Stop FAN
Advanced
►CPU FAN Mode / System FAN1 Mode / System FAN2 Mode / System FAN3 Mode
These item are used to select the mode of CPU FAN / System FAN1 / System FAN2 / System
FAN3. The default option is: [Smart Fan].
►CPU FAN Speed / System FAN1 Speed / System FAN2 Speed / System FAN3 Speed
This item shows the current speed of CPU FAN / System FAN1 / System FAN2 / System
FAN3.
►SandyBridge-E CPU Temperature/ Waimea Bay System Temperature/ Patsburg PCH
Temperature
This items show the related temperature information the BIOS automatically detects.
► CPU VSA Voltage / CPU Core Voltage / CPU VTT(Uncore) Voltage / DDR3 Memory
Voltage (VDIMM1&2) / DDR3 Memory Voltage (VDIMM3&4) / Battery 3V Voltage / PSU
Stand by 3.3V Rail / PSU 3.3V Rail
This items show the related voltage information the BIOS automatically detects.