Foxconn 761GXM2MA-KRS2H User Manual
Page 43
36
Chapter 3 BIOS Description
v
PCIPME Power Up Control
This option is used to enabled or disable the system to be waken up by PCI
card.
v
PS2KB Wakeup from S3/S4/S5
This option used to set which action will wake up PS/2 keyboard from S3/S4/
S5 status.The hotkey is Ctrl+Alt+Backspace.The setting values are Any Key,
Hot Key,Password.
v
PS2MS Wakeup from S3/S4/S5
This option used to set which action will wake up PS/2 keyboard from S3/S4/
S5 status.The setting values are:Disabled, Click,Move&Click.
v
Power Up By Alarm
This option is used to enable or disable the feature of boot up the system on
a scheduled time/date.When it set as”Enabled”,the following three items can
be used.
v
Month Alarm
It is used to set the timing for the start-up month.The setting values contain
0-12 and NA.
v
Day of Month Alarm
It is used to set timing for the start-up date.The setting values contain 0-31.
v
Time (hh:mm:ss) Alarm
It is used to set the timing for the start-up time.The setting values contain hh:
0-23;mm:0-59;ss:0-59.
v
Reload Global Timer Events
Primary IDE/Secondary IDE/FDD,COM,LPT,Port/PCI PIRQ[A-D]#
When Enabled, an event occurring on each listed device restarts the global
timer for Standby mode.
PDF 文件使用 "pdfFactory" 试用版本创建