Foxconn 761GXM2MA-KRS2H - Manual (Page 42)

35
Chapter 3 BIOS Description
v MODEM Use IRQ
This option is used to set the IRQ in which the modem can use. The system
will automatically wake up when the modem receives an incoming call.
v Hot Key Function As
This option is used to set the hot key function.
v HDD Off After
This option is used to set the time before HDD off.
v Power Button Override
This option is used to set the item of power button override.
v Power State Resume Control
This option is used to set the power state resume.
v PM Wake Up Events
Press enter to set the items of PM Wake Up Events.
v ACPI AWAY Mode
This option is used to set whether the ACPI AWAY mode is enabled.
PM Wake up Events menu
v IRQ [3-7,9-15] NMI
This option is used to set if open IRQ [3-7,9-15] NMI mode.
v IRQ 8 Break Suspend
This option is used to set if use IRQ 8 to resume the system from the Suspend
mode.
v RING Power Up Control
This option is used to enable or disable the system to be waken up by a
incoming call to an installed fax/modem.
PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn