Foxconn 761GXM2MA-KRS2H User Manual
Page 34
27
Chapter 3 BIOS Description
v
Memory clock
This item is used to set memclock.
v
DRAM Bank interleaving
This item is used to set the DRAM Bank interleaving.
v
Tun on all DIMM Clcocks
This item is used to set if open DIMM clocks.
v
DQS Training Control
This item is used to Control DQS Training.
v
CKE base power down mode
This item is used to set the mode of the CKE base power down
.
v
CKE base powerdown
This item is used to set CKE base powerdown.
v
Memclock tri-stating
This item is used to set Memclock tri-stating.
v
Memory Hole Remapping
This item is used to enalbe or disable the memory hole remapping.
v
Bottom of UMA DRAM [31:24]
This item is used to set Bottom of UMA DRAM [31:24].
v
CAS# Latency
This option controls the CAS latency, which determines the timing delay (in
clock cycles) before SDRAM starts a read command after receiving it.
DRAM Configuration Menu
PDF 文件使用 "pdfFactory" 试用版本创建