Initializing and using the disk array – Foxconn NF3250K8AA-ERS User Manual
Page 66
Chapter 5 NVIDIA RAID Introduction
59
NF3250K8AA/NF3250GK8AA Series User Manual
Initializing and Using the Disk Array
The RAID array is now ready to be initialized under Windows.
1. Launch Computer Management by clicking “Start” —> “Settings” —> “Control
Panel” then open the “Administrative Tools” folder and double click on “Computer
Management”.
The actual disks listed will depend on your system, and the unallocated partition is
the total combined storage of two hard disks. You must format the unallocated disk
space in order to use it.
3. Format the unallocated disk space. Right click “Unallocated space”, select “New
Partition…” and follow the wizard. After the drive has been formatted, it is ready for
use.
2. Follow screen instructions to install. While finished, the “Computer Manage-
ment” window appears.