Foxconn NF3250K8AA-ERS - Manual (Page 44)

37
Chapter 3 BIOS Description
NF3250K8AA/NF3250GK8AA Series User Manual
IDE Function Menu
v IDE Primary/Secondary Master/Slave PIO (Default: Auto)
These four items let you assign which kind of PIO (Programmer Input/Output)
is used by IDE devices. Choose “Auto” to let the system auto detect which PIO
mode is best, or select a PIO mode from 0-4.
v Primary/Secondary Master/Slave UItraDMA (Default: Auto)
UItraDMA technology provides faster access to IDE devices. If you install a
device that supports UItraDMA, change the appropriate items on this list to
Auto. The available setting values are: Disabled and Auto.
v IDE DMA Prefetch Mode (Default: Enabled)
This option is used to enable or disable IDE DMA Prefetch Mode.
v IDE DMA transfer access (Default: Enabled)
This option is used to enable or disable IDE DMA transfer access.
v Serial-ATA 2 (Internal PHY) (Default: Enabled)
This option is used to enable or disable Serial-ATA 2.
v OnChip IDE Channel 0/1
This option is used to set the onchip IDE channel 0/1. The available setting
are: Disabled and Enabled.