Foxconn NF3250K8AA-ERS - Manual (Page 18)

11
Chapter 2 Installation Instructions
NF3250K8AA/NF3250GK8AA Series User Manual
Note:
Be sure to unplug the AC power supply before adding or re-
moving expansion cards or other system peripherals, espe-
cially the memory devices, otherwise your motherboard or the
system memory might be seriously damaged.
3. The plastic clips at both sides of the DIMM slot will lock automatically.
104 Pins 80 Pins
Installation of DDR Memory
1. There is only one gap in the center of the DIMM slot, and the memory module
can be fixed in one direction only.
2. Align the memory module to the DIMM slot, and insert the module verti-
cally into the DIMM slot.
Memory
This motherboard includes three 184-pin slots with 266/333/400 MHz Single
Channel DDR DRAM interface, If you install two or more modules, they must be
the same speed. Mixing memory modules from different manufactures are not
recommended.
For the lastest memory modules support list, please visit the website:
http://www.foxconnchannel.com