Foxconn NF3250K8AA-ERS - Manual (Page 14)

7
Chapter 2 Installation Instructions
NF3250K8AA/NF3250GK8AA Series User Manual
CPU
This motherboard supports Sempron T M or Athlon T M 64 processors an d
HyperTransport TM Technology.
1. Unlock the socket by pressing the le-
ver sideways, then lift it up to a 90 o
angle.
2. Align the cut edge to the gap in the base
of the socket. Carefully insert the CPU
into the socket until it fits in place.
3. W hen the CPU is in place, press it
firmly on the socket while you push
down the socket lever to secure the
CPU. The lever clicks on the side tab
to indicate that it is locked.
Installation of CPU
Follow these steps to install the CPU.
Push down the socket
lever to secure the CPU.
Cut edge
90 o
Gap in the base
For the detailed CPU vendor list qualified on this motherboard, please
visit the website:
http://www.foxconnchannel.com
Attention:
The CPU pins must be properly aligned with the holes in the
socket, otherwise the CPU may be damaged.