Formax 6206 Series - Manual (Page 74)

Troubleshooting
To solve problems:
When you contact the service organization, you will be asked for
the last error message.
1.
Write down the error number. When you press the
[ i ]
button in the screen with the
error message, an error number is displayed.
2.
Consult the troubleshooting table to solve the problem on page 69.
3.
Switch the system off and on again to verify system operation.
4.
When the error still occurs contact your service organization.
Troubleshooting Tables
Startup Problems
Reference Remedy Possible cause Symptom
- Connect the system
to the power supply. System not connec-
ted to the power sup-
ply.
The system cannot
be started.
- Switch the system on. You switched off the
system accidentally.
- Close the covers. A cover is opened.
- Connect the system
to the mains the
power supply. System not connec-
ted to the power sup-
ply.
The display does not
start up.
- Switch the system on. You switched off the
system accidentally.
9
English
69
| Page 69 | okt-05-2012 11:39 |