Safety, English – Formax 6206 Series User Manual

Page 7

Symbols

This manual uses the symbols listed below.

WARNING

: Indicates a human safety hazard.

ATTENTION

: A risk to the equipment or mail could result from an

action you may perform.

NOTE

: A remark that explains different cases or specificities.

TIP

: Advice to help save you time when processing your mail.

SUPERVISOR

: Indicates that you have to use the supervisor

menu to perform the procedure.

Safety

Warnings

• Disconnect the power supply before performing any maintenance.
• Before connecting the system to the electrical supply, ensure that the system is

suitable for the local mains voltage. Refer to the serial plate on your system for voltage
requirements.

Precaution

The general process of automated document handling can sometimes create a build up of

static electricity.Therefore we recommend that the following measures are taken to reduce

the side effects of any electrostatic charge.

• Make sure that you operate the system within the recommended temperature and

humidity conditions.

• Make use of antistatic mats where appropriate.
• If necessary, make use of an ionizer to reduce static charge build up in the room

where the system is located.

Please contact your supplier for further information.

| Page 2 | okt-05-2012 11:39 |

English