Formax 6206 Series - Manual (Page 60)

Operator Maintenance 8
Maintenance Schedule
Disconnect the mains supply before you do any maintenance to
the system.You are not allowed to service the system beyond what
is described in this operator manual. All other servicing must be
carried out by qualified service personnel only. Please contact
your service organization.
• Keep the system in proper condition: remove dust, paper remains, etc.
• When dirty, clean the sealing area and rubber rollers with a slightly wetted cloth,
soaked in warm water.
• When dirty or saturated, clean or replace the brushes of the envelope sealing on
page 56.
• When dirty, clean the feed rollers of the feeders. If necessary replace the separation
rollers on page 59.
• When dirty, clean the insert rollers.
• Make sure the sealing liquid bottle contains sufficient sealing liquid. If necessary
refill
on page 18.
55
| Page 55 | okt-05-2012 11:39 |
8
English