Formax FD 2000IL System - Manual (Page 7)

3
2. Install lower fold plate into pressure sealer.
Slide the fold plate (with the thumbscrews facing
up and throat toward inside of machine, fi gure 4b),
until it rests on the two silver bars (fi gure 4a) and
locks into place.
Fig. 4b
Lower fold plate
alignment bars
Fig. 4a
3. Install upper fold plate into pressure sealer.
Match up alignment pins (fi gure 5) on the pressure
sealer with grooves on the underside of the
fold plate. Be sure to slide the plate *under* the
shoulder screw.
CAUTION: Do not operate the machine without the
fold plates installed.
Fig. 5
Upper fold plate
alignment pins
Shoulder screw