Formax FD 2000IL System - Manual (Page 18)

14
WARNING: Turn off machine and unplug cord from its receptacle.
If a jam occurs between the metal sealing rollers open the top cover and remove the upper fold plate. Remove
the jam-clearing tool (located under the top fold plate), apply the tool to the upper metal roller (Fig. 13) and
turn clockwise until the paper jam is clear. ( Caution: Do not apply excessive force or rollers may be damaged.)
( Caution: Do not turn counter-clockwise and force the form(s) to exit the machine or the rollers may be
damaged.) Remove the jammed form, return tool to holder and reinstall the upper fold plate. Reinstall cover
and press the reset button.
Note: Press the black button (Fig. 14) near the power cord inlet to reset the breaker if necessary.
A. Clearing paper jams from the steel pressure seal rollers:
Fig. 13 Fig. 14
WARNING: Turn off machine and unplug cord from its receptacle.
If a jam occurs in the sealer infeed deck, slide printer back to gain access to infeed. Lift the transport deck
cover (Fig. 15a) which will lock into place in the upright position. Remove jammed document.
To close, hold transport deck cover with one hand. With the other hand, slide the transport deck release handle
(Fig. 15b) and slowly lower the cover back into place.
Note: Press the black button (Fig. 14) near the power cord inlet to reset the breaker if necessary.
B. Clearing paper jams from the pressure seal infeed deck:
Fig. 15a Fig. 15b