Formax FD 2000IL System - Manual (Page 5)

1
DESCRIPTION
With the Formax FD 2000IL AutoSeal System operators can print, fold and seal all in one streamlined process.
One-piece pressure sensitive forms are loaded into an existing laser printer where they’re printed and fed directly
into the IL Pressure Sealer where they’re folded, sealed and output as a mail-ready piece.
SPECIFICATIONS
** Dimensions include IL Pressure Sealer and IL Alignment Base.
Printer Compatibility: HP & Troy P3005, only with two 500-sheet trays
HP & Troy P2015, only with two 250-sheet trays (requires FD 2000-46IL riser)
Lexmark & Source T640, only with two 250-sheet trays
(requires FD 2000-45IL riser)
Consult your Formax dealer for an updated list of additional laser printers which
are compatible with the FD 2000IL System.
Speed: Printer dependent
Paper Size: Up to 8.5” W x 14” L
Duty Cycle: Up to 50,000 pieces per month
Power Requirements: FD Model: 120 Volts AC, 50/60 Hz
FE Model: 220 Volts AC, 50/60 Hz
Dimensions (closed) **: 19” W x 46” L x 23” H
Dimensions w/18” Conveyor (closed): 19” W x 65” L x 23” H
Tabletop Area Required:
20” W x 43” L
Tabletop Area Required
w/18” Conveyor:
20” W x 69” L
Dimensions with Cabinets and
18” Conveyor:
20” W x 74” L x 48” H
UNPACKING
1. Check package for shipping damage. If there is shipping damage do not discard the box.
2. CAUTION: Two people must lift the Pressure Sealer out of the box.
3. Package should contain the IL Pressure Sealer and two piece IL Alignment Base.
FD 2000IL System
IL Pressure Sealer
Printer alignment base
Printer (not included in IL System)
18” conveyor
(optional)
Printer outfeed / sealer infeed
Sealer transport deck
Lower printer feed tray
Upper printer feed tray
Sealer alignment base Lower fold plate
Upper fold plate