Fluke Biomedical QED 6 - Manual (Page 21)

Introduction and Specifications
Upgrading the Analyzer
1
1-9
Back Panel
The Back Panel includes a battery holder that houses a 9-volt alkaline battery,
and a dc battery eliminator jack. An RS232 D-9-pin serial port allows
communications to a computer, serial printer, or other Fluke test equipment.
Upgrading the Analyzer
A number of pre-configured Analyzer models are available. In addition, older
models may be upgraded by contacting the Fluke Biomedical Service Center.
Available Analyzer models are listed in Table 1-3.
Table 1-3. Available Analyzer Models
Model Characteristics
QED 6
Base unit. Features output energy, synchronization time, peak
measurements, bi-directional RS232.
QED 6M
Features output energy, sync time, peak measurements,
overshoot, bi-directional RS232, waveforms, charge time
measurements, 28 programmable autosequences.
QED 6H
Output energy, sync time, peak measurements, overshoot, bi-
directional RS232, waveforms, charge time measurements, 28
programmable autosequences, pacer output measurements
and pacer refractory period measurements.