Fluke Biomedical 07-444 - Manual (Page 14)

Nuclear Associates 07-444
Operators Manual
3-4
3.7 Setup Program Functions
Setup Mode Functions include:
• Making a single point measurement
• Entering a Facility Title
• Calibrating the optical density with a step wedge
• Clearing the data log
• Setting RS-232 and other communication parameters
• Entering information into the data log
• Setting the step wedge type
• Setting the graphics and control chart parameters
• Sending all logged data out the communication port
Detailed information and specific procedures available from the Setup Mode are outlined in Section 4 -
Setup.
3.8 Calibration
The calibration function, accessible through the Setup Program, allows the user to calibrate optical
density using a reference step wedge (supplied with each unit). The calibration value is entered from the
front panel and then read from the Reference Step Wedge. Refer to Section 6 - Calibration for more
information.