Flowserve Limitorque Master Station III - Manual (Page 58)

Limitorque Master Station III FCD LMENIM5001-02 – 12/13
58
NOTE: File Manager is disabled when the unit is running in “Active” mode. To turn off “Active”
mode and access the File Manager, go to the System Configuration menu as detailed in Section 8.1
and select the “Redundant Config” button. Under the Requested Mode title, select the “Disabled”
button and tap the “Back” button to return to the System Configuration screen. All the File Manager
operations can now be changed by tapping the “File Manager” button and following the proceeding
directions.
Figure 8.35 - File Manager
8.2.8.1 Import Config File
The Import Config File screen (Figure 8.36) allows the user to access the file chooser and select
a configuration file to be copied from a connected USB Flash Drive to the default directory for the
Config File archives. The Master Station’s existing configuration file is overwritten with the new,
imported file.
Figure 8.36 - Import Config File