Fire Magic Echelon Diamond Stand Alone Grill - Manual (Page 16)

16
INSTALLATION (cont.)
Fig. 16-1
Zone divider
Groove
Groove
Front
INSTALL THE FLAVOR GRIDS
Place the fl avor grids directly onto the studs on the
burners. The panels allow heat from the burners to
be evenly distributed throughout the cooking area.
The panels are stainless steel and will heat and cool
quickly, making your barbecue very responsive to
the changes you specify in grill temperature. They
are rust resistant and may be cleaned with standard
oven cleaners. Some discoloring will be seen with
use. This is normal for stainless steel and does not
affect the function.
Fig. 16-2 Install fl avor grids
Place onto studs
Fig. 16-1 Install zone dividers
REV 5 - 1412090835 L-C2-330
INSTALL ZONE DIVIDERS
Place the zone dividers as shown (Fig. 16-1) into the
grooves in the inner fi rewall of the grill to allow for
maximum heat control and thermometer accuracy in
each zone. Remove and store during rotisserie use.